LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Emission Control Systems (Aux. Emission Control Devices) (H4DO)) >> PCV Hose Assembly >> Installation

PCV Hose Assembly: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the PCV hose assembly to the PCV connector.
    Fig 1: Locating PCV Hose
    G07664961Courtesy of SUBARU OF AMERICA, INC.
  2. Install the PCV hose assembly onto the cylinder block RH and cylinder block LH.
    NOTE: Use a new clamp for the PCV hose assembly, fit the cut out in the ST with the protrusion on the clamp as shown in the figure, and lock the clamp.

    ST 18353AA000 CLAMP PLIERS

    Fig 2: Pinching Clamp Of PCV Hose Assembly
    G07664960Courtesy of SUBARU OF AMERICA, INC.
  3. Install the tumble generator valve assembly. < Ref. to INSTALLATION , Tumble Generator Valve Assembly >
  4. Install the intake manifold. < Ref. to INSTALLATION , Intake Manifold >
scientia non olet · About LEMON Manuals