Vibration Damper, Removing And Installing: Removing
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .
-- Loosen the vibration damper bolts -arrow- a few turns by counter-holding the wrench on the generator ribbed belt pulley nut.
-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Remove the bolts -arrow- and the vibration damper.