Coolant Thermostat, Removing And Installing: Removing

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bolts And Intake Manifold

Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the intake manifold upper section. Refer to FUEL PRESSURE SENSOR -G247-, REMOVING AND INSTALLING .

-- Remove the front coolant pipe. Refer to FRONT COOLANT PIPES, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

Fig 2: Identifying Bolts & Thermostat

Courtesy of AUDI OF AMERICA, LLC

-- Remove the coolant thermostat with the connections.