Coolant Thermostat, Removing And Installing: Installing

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification. Refer to OVERVIEW - COOLANT PUMP/THERMOSTAT .

Install in reverse order of removal. Note The Following:

NOTE:

Replace The Seals

-- Install front coolant pipe. Refer to FRONT COOLANT PIPES, REMOVING AND INSTALLING .

-- Install the intake manifold upper section. Refer to FUEL PRESSURE SENSOR -G247-, REMOVING AND INSTALLING .

-- Fill the coolant. Refer to FILLING .