Read Diagnostic Trouble Code (DTC): Operation: ECM
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- On << Main Menu >> display, select {Each System Check}.
- On << System Selection Menu >> display, select {Engine Control System}.
- Select [OK] after the information of engine type is displayed.
- On << Engine Diagnosis >> display, select {Diagnostic Code(s) Display}.
- On << Diagnostic Code(s) Display >> display, select {Current DTC} or {Past DTC}.NOTE:
- For detailed operation procedures, refer to PC application help for Subaru Select Monitor.
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). < Refer to LIST , List of Diagnostic Trouble Code (DTC). >