DTC P0513 Incorrect Immobilizer Key: DTC Detecting Condition
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Incorrect immobilizer key (Use of unregistered key in body integrated unit)
DIAGNOSTIC PROCEDURE CHART
| Step | Check | Yes | No |
|---|---|---|---|
| 1 PERFORM IGNITION KEY REGISTRATION. Perform registration to all keys used for the vehicle. Refer to the PC application help for Subaru Select Monitor. |
Is registration of all keys complete? | End. | Replace ignition keys (including transponder) which cannot be registered. Go to step 2 . |
| 2 PERFORM IGNITION KEY REGISTRATION. Perform registration to all keys used for the vehicle. Refer to the PC application help for Subaru Select Monitor. |
Is registration of all keys complete? | End. | Replace the body integrated unit < Refer to BODY INTEGRATED UNIT . > Register all ignition keys (transponders). Refer to the PC application help for Subaru Select Monitor. |