LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1169 (Cooling System [CFSA] (Coupe)) >> 19 Cooling System >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Components Fastener Size Nm
After-run coolant pump - 5
Bracket for auxiliary cooler
Bolt - 3.5
Nut - 8
Bracket for radiator 2 - 4.5
Clamp - 9
Coolant pump housing - 9
Coolant pump - 9
Drain plug for front coolant pipe - 15
Drain plug for map controlled engine cooling thermostat - 4
Engine Coolant Temperature (ECT) sensor - 9
Fan shroud - 5
Front coolant pipe 1 - 8 + 90°
Front coolant pipe to coolant pump housing - 9
Front upper coolant pipe - 9
Map controlled engine cooling thermostat - 9