Connect The Coolant Hose To The Coupling
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove The Old O-Ring -2- In The Coolant Hose -3-.
-- Coat The New O-Ring With Coolant And Install It In The Coolant Hose.
-- Press The Coolant Hose Onto The Connection -1- Until It Engages Audibly.
-- Press The Coolant Hose On Again And Pull To Make Sure The Connection Is Engaged Correctly.