After-Run Coolant Pump -V51-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note The Following:

Tightening Specification. Refer To Figure.

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the right front wheel housing liner. Refer To FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING, AUDI RS5 .

-- Install The Right Front Wheel. Refer To WHEEL, CHANGING AND MOUNTING .

-- Check The Coolant Level. Refer To CHECK THE COOLANT LEVEL .