Overview - Coolant Pipes
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
- Drain Plug
- 15 Nm
- Seal
- Replacing
- Front Coolant Pipe
- Removing and installing. Refer To FRONT COOLANT PIPES, REMOVING AND INSTALLING .
- Bolt
- 8 Nm +90° turn
- Replacing
- Seal
- Replacing
- Front Coolant Pipe in the Center
- Removing and installing. Refer To FRONT COOLANT PIPES IN THE CENTER, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Clamp
- Bolt
- 9 Nm
- Front Upper Coolant Pipe
- Removing and installing. Refer To FRONT UPPER COOLANT PIPE, REMOVING AND INSTALLING .
- O-Ring
- Replacing
- Bolt
- 9 Nm
- Bracket
- For The Connectors
- Engine Coolant Temperature Sensor -G62-
- Removing and installing. Refer To ENGINE COOLANT TEMPERATURE SENSOR -G62-, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- O-Ring
- Replacing
- O-Ring
- Replacing
- Clamp
- Bolt
- 9 Nm
- O-Ring
- Replacing
- Bolt
- 8 Nm +90° turn
- Replacing