LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1168 (Lubrication [CFSA] (Coupe)) >> 17 Lubrication >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Components Fastener Size Nm
Air guide to front engine oil cooler - 7
Bracket for the ATF pipes, nut - 9
Bracket for the front engine oil cooler
Bolt - 9
Nut - 6
Engine oil temperature regulator - 9
Hose/line assembly for engine oil 1 - 9
Hose/line assembly for engine oil 2 - 9
Housing for oil check valve 3 - 5 + 90°
Intake tube for oil pump 3 - 5 + 45°
Lock carrier - 9
Oil cooler tightening specifications and sequence - Figure
Oil drain plug - 25
Oil filter housing
  - 9
  - 22
Oil filter housing cap - 25
Oil filter housing bracket - 9
Oil level thermal sensor, nut - 9
"Oil pan lower section, tightening specification and sequence - Figure
Oil pan upper section, tightening specifications and sequence - Figure
Oil pipe - 9
Oil pipes 4 - 9
Oil pressure regulation valve - 9
Oil pressure switch - 20
Oil pump 3 - 8 + 90°
Oil return pipe - 9
Oil temperature sensor - 9
Reduced oil pressure switch - 20
Sealing plug - 50
Spray nozzle valve cover 3 - 5 + 90°