Engine Oil Cooler, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note The Following:
- Tightening specifications. Refer to Figure.
NOTE:
Replace the gaskets -3-.
Secure all hose connections with hose clamps of the same type as those equipped by the factory.
-- Tighten the oil cooler bolts. Refer to Figure.
-- Install the generator bracket. Refer to OVERVIEW - RIBBED BELT DRIVE .