Oil Pump, Removing And Installing: Installing
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specification. Refer to OVERVIEW - OIL PAN/OIL PUMP .
Install in reverse order of removal. Note The Following:
NOTE:
Replace The O-Rings.
-- Install oil pump onto the drive axle and fasten.
-- Install the oil pan lower section. Refer to Installing .
-- Fill the engine oil and check the level. Refer to OIL LEVEL, CHECKING