Fuel Level Sensor 1: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2010 Audi A5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Installation Is In Reverse Order Of Removal, Note The Following:
-- Insert Fuel Level Sensor -G- In Guides On Fuel Delivery Unit And Push Down Until It Engages.
-- Connect Electrical Connector And Make Sure It Engages.
-- Install Fuel Delivery Unit INSTALLING While Following The Information On Connecting The Battery.