LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1163 (Fuel Supply System [CAUA,CALA] (Coupe)) >> 20 Fuel Supply System >> Diagnosis And Testing >> EVAP Canister And Leak Detection System Hose Diagram

EVAP Canister And Leak Detection System Hose Diagram

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2010 Audi A5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: EVAP Canister And Leak Detection System Hose Diagram
GWWA20-10471Courtesy of AUDI OF AMERICA, LLC
  1. Vent Line
    • From EVAP canister to EVAP canister purge regulator valve
    • Clipped Into Brackets Under Vehicle Floor
  2. Vacuum Line
    • From Engine To Leak Detection Pump
    • Clipped Into Brackets Under Vehicle Floor
  3. Vent Line
    • From fuel tank locking flange to EVAP canister
    • Clipped into brackets under vehicle floor
  4. Fuel Tank Locking Flange
  5. Air Filter Housing
    • For Leak Detection Pump
  6. Connecting Line
    • From Leak Detection Pump -V144- To Air Filter
    • Clipped Into Brackets Under Vehicle Floor
  7. EVAP Canister
    • Component Location:  Under Bottom Of Luggage Compartment
    • Removing and installing, refer to EVAP CANISTER .
  8. Leak Detection Pump
    • Component Location:  On EVAP Canister Under Bottom Of Luggage Compartment
    • Check in "Guided Fault-Finding" operating mode
    • Removing and installing, refer to LEAK DETECTION PUMP .
  9. To Brake Booster
  10. EVAP Canister Purge Regulator Valve