Map Controlled Engine Cooling Thermostat -F265-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note The Following:

Tightening Specification. Refer to OVERVIEW - COOLANT PUMP/THERMOSTAT .

NOTE:

Replace Sealing Rings And O-Rings.

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the left lock carrier brace. Refer to LOCK CARRIER .

-- Fill with coolant. Refer to FILLING .