After-Run Coolant Pump -V51-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install In Reverse Order Of Removal. Note The Following:
- Tightening Specification. Refer to Figure.
NOTE:
Secure all hose connections with hose clamps of the same type as those equipped by the factory.
-- Install the front noise insulation. Refer to NOISE INSULATION .
-- Check the coolant level. Refer to CHECK THE COOLANT LEVEL .