Overview - Coolant Pipes: Notes

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Coolant Pipes

Courtesy of AUDI OF AMERICA, LLC

Oil Drain Plug
- 10 Nm
Seal
- Always replace
Front Coolant Pipe
- Removing and installing. Refer to FRONT COOLANT PIPE, REMOVING AND INSTALLING .
Bolt
- 9 Nm
Seal
- Always replace
Lower Left Coolant Pipe
- Removing and installing. Refer to LOWER LEFT COOLANT PIPE, REMOVING AND INSTALLING .
Bolt
- 9 Nm
O-ring
- Always replace
Coolant Connecting Piece
- Removing and installing. Refer to COOLANT CONNECTIONS, REMOVING AND INSTALLING .
Right Coolant Pipe
- Removing and installing. Refer to RIGHT COOLANT PIPE, REMOVING AND INSTALLING .
Bolt
- 9 Nm
Bolt
- 9 Nm
O-ring
- Always replace
Coolant Hose
Rear Coolant Pipe
- Removing and installing. Refer to REAR COOLANT PIPE, REMOVING AND INSTALLING .
Engine Coolant Temperature Sensor -G62-
- Removing and installing. Refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING .
O-ring
- Always replace
Clip
Bolt
- 9 Nm
O-ring
- Always replace
Coolant Hose
Bolt
- 9 Nm
Nut
- 9 Nm
Bolts
- 9 Nm
Upper Left Coolant Pipe
- Removing and installing. Refer to UPPER LEFT COOLANT PIPE, REMOVING AND INSTALLING .
Bolt
- 9 Nm
O-ring
- Always replace
Bolt
- 9 Nm