LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1162 (Cooling System [CAUA] (Coupe)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Front Coolant Pipe, Removing And Installing >> Installing

Front Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note The Following  :

NOTE:

Replace The O-Rings.

-- Clean and/or smooth the sealing surfaces of the O-rings.

-- Coat the O-rings with coolant and install them.

-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to FILLING .

scientia non olet · About LEMON Manuals