Right Combination Valve, Removing And Installing, Without Vacuum Control: Removing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Removing the coolant connecting pieces. Refer to COOLANT CONNECTIONS, REMOVING AND INSTALLING .

-- Remove the Throttle Valve Control Module -J338-. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .

-- Remove the secondary air hose -arrow- by pressing the release buttons.

Fig 1: Identifying Right Secondary Air Injection (Air) Combination Valve

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore item -1-.

To provide a better illustration, component location is shown from behind with engine removed.

-- Remove the bolt -2- and move the bracket together with the wiring harness to the side.

-- Remove bolts -3- and remove the right Secondary Air Injection (AIR) combi-valve.