Purge Control Solenoid Valve 2

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Connect the vacuum hose as shown in the figure.

Fig 1: Connecting Vacuum Hose (Purge Control Solenoid Valve 2)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 2: Locating Vacuum Hose Mounting Bolt With Torque Specifications

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

T1: 17 N.m (1.7 kgf-m, 12.5 ft-lb)

T2: 19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 3: Locating Vacuum Hose Mounting Bolt With Torque Specifications

Courtesy of SUBARU OF AMERICA, INC.