Fuel Tank Pressure Sensor: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Place "NO OPEN FLAMES" signs near the working area.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler lid and remove the fuel filler cap.
Lift up the vehicle.
Disconnect the connector (A) and the pressure hose (B) from the fuel tank pressure sensor and remove the fuel tank pressure sensor together with the bracket.

Fig 2: Locating Fuel Tank Pressure Sensor Bracket Mounting Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel tank pressure sensor from the bracket.

Fig 3: Locating Fuel Tank Pressure Sensor Mounting Bolt
Courtesy of SUBARU OF AMERICA, INC.