Knock Sensor, Removing And Installing: Removing: Notes
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Fuel system is under high pressure! Before opening high pressure components of the fuel injection system, pressure must be relieved to residual pressure. Refer to FUEL SUPPLY SYSTEM SAFETY PRECAUTIONS .
- Then wrap a clean cloth around the connection and relieve residual pressure by carefully loosening the connection.
- Always follow the instructions when disconnecting the battery. Refer to BATTERY .
-- Remove the intake manifold. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING, MAGNESIUM INTAKE MANIFOLD .
Remove the Respective Right Cylinder Bank Knock Sensor
2 -Knock Sensor 1 -G61-
9 - Knock Sensor 2 -G66-