Normal Operation and Fault Conditions
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
The RCM continuously monitors the passenger seat track position sensor circuits for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Current out of range
- Faulted passenger seat track position sensor
If a fault is detected, the RCM stores DTC B00C5:11, B00C5:12, B00C5:13 or B00C5:1D in memory and sends a message to the IPC to illuminate the airbag warning indicator.
PPT N RCM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B00C5:11 | Passenger Seat Track Position Restraints Sensor: Circuit Short to Ground | Sets when the RCM senses a short to ground from the passenger seat position sensor circuit for more than 6 seconds. |
| B00C5:12 | Passenger Seat Track Position Restraints Sensor: Circuit Short to Battery | Sets when the RCM senses a short to voltage from the passenger seat position sensor circuit for more than 6 seconds. |
| B00C5:13 | Passenger Seat Track Position Restraints Sensor: Circuit Open | Sets when the RCM senses an open from either passenger seat position sensor circuit for more than 6 seconds. |
| B00C5:1D | Passenger Seat Track Position Restraints Sensor: Circuit Current Out of Range | Sets when the RCM measures current outside of an acceptable range from the passenger seat position sensor circuit for more than 6 seconds. |