Normal Operation and Fault Conditions
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
The RCM continuously monitors the passenger seatbelt buckle switch circuit for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Current out of range
- Faulted passenger seatbelt buckle switch
If a fault is detected, the RCM stores DTC B0052:11, B0052:12, B0052:13 or B0052:1D in memory and sends a message to the IPC to illuminate the airbag warning indicator.
PPT G RCM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B0052:11 | Passenger Seatbelt Sensor: Circuit Short to Ground | Sets when the RCM senses a short to ground from the passenger seatbelt buckle sensor circuit for more than 6 seconds. |
| B0052:12 | Passenger Seatbelt Sensor: Circuit Short to Battery | Sets when the RCM senses a short to voltage from the passenger seatbelt buckle sensor circuit for more than 6 seconds. |
| B0052:13 | Passenger Seatbelt Sensor: Circuit Open | Sets when the RCM senses an open from either passenger seatbelt buckle sensor circuit for more than 6 seconds. |
| B0052:1D | Passenger Seatbelt Sensor: Circuit Current Out of Range | Sets when the RCM measures current outside of an acceptable range from the passenger seatbelt buckle sensor circuit for more than 6 seconds. |