LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1148 (RCM Guided Routine Testing -- (2 Of 4)) >> Pinpoint Tests >> Pinpoint Test AR: RCM Identified As Cause Of Fault >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

The RCM monitors various inputs and communicates on the CAN. If the values received are out of range or not what should be expected, the RCM sets a DTC. 

PPT AR RCM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
B1193:00 Crash Event Storage Full and Locked: No Sub Type Information Sets when the RCM has detected a crash event.
U0300:00 Internal Control Module Software Incompatibility: No Sub Type Information Sets when the RCM detects an incorrect configuration.
B142D:00 Pyrotechnic End of Life Activation Performed: No Sub Type Information Sets when the RCM has experienced a pyrotechnic activation event.
U2101:00 Initial Configuration Not Complete: No Sub Type Information Sets when the RCM detects an incorrect configuration.
U2200:00 Control Module Configuration Memory Corrupt: No Sub Type Information Sets when the RCM detects an incorrect configuration.
U3000:04 Control Module: System Internal Failure Sets when the RCM detects an internal failure.
U3000:46 Control Module: Calibration/Parameter Memory Failure Sets when the RCM detects an internal failure.
U3000:49 Control Module: Internal Electronic Failure Sets when the RCM detects an internal failure.
scientia non olet · About LEMON Manuals