LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1140 (Supplemental Restraint System) >> Removal And Installation >> C-Pillar Side Impact Sensor >> Installation

C-Pillar Side Impact Sensor: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: The C-pillar side impact sensor mating surfaces must be smooth and allow for a flush attachment to each other.

    To install, reverse the removal procedure.

  2. Repower the SRS. Refer to: Supplemental Restraint System (SRS) Repowering .
scientia non olet · About LEMON Manuals