LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1139 (Safety Belt System) >> Removal And Installation >> Second Row Seatbelt Buckle >> Removal

Second Row Seatbelt Buckle: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: LH shown, RH similar.
  1. Remove the second row seat. Refer to: Second Row Seat .
  2. Position the second row seat to access the side shield screw.

    1. Pull the release handle.
    2. Partially fold the seat.

    GFD275654Courtesy of FORD MOTOR COMPANY
  3. Remove the second row seat recline cover screw.
    GFD275655Courtesy of FORD MOTOR COMPANY
  4. Fold the second row seat.
    GFD275656Courtesy of FORD MOTOR COMPANY
  5. Remove the second row seat recline cover.
    GFD275657Courtesy of FORD MOTOR COMPANY
  6. Remove the bolt and the second row seatbelt buckle.

    Torque: 30 lb.ft (40 Nm)

GFD275659Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals