LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1139 (Safety Belt System) >> Removal And Installation >> Front Seatbelt Retractor and Pretensioner >> Installation

Front Seatbelt Retractor and Pretensioner: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: During installation, make sure the seatbelt webbing is not twisted and the seatbelts and buckles are accessible to the occupants.
  1. To install, reverse the removal procedure.
  2. Repower the SRS. Refer to: Supplemental Restraint System (SRS) Repowering .
  3. Check the seatbelt system for correct operation. Refer to:DESCRIPTION AND OPERATION .