Wiper/Washer Switch
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
The wiper/washer switch is mounted directly to the SCCM. The windshield wiper/washer inputs to the SCCM are:
- Mist wipe (without police package)
- Windshield wash
- Off
- AUTO 1/INT 1
- AUTO 2/INT 2
- AUTO 3/INT 3
- AUTO 4/INT 4
- AUTO 5/INT 5
- AUTO 6/INT 6
- AUTO 7/INT 7
- Low
- High
The rear wiper/washer inputs to the SCCM are:
- Off
- INT 1
- INT 2 (continuous wipe)
- Rear window wash