Pinpoint Test Ab : B1087:83 Or B1087:87: Notes
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Wiring Diagram Remote Keyless Entry and Alarm for schematic and connector information.
Normal Operation and Fault Conditions
The DDM communicates with the DRDM over a LIN circuit. In the event the DRDM fails, the LHR power window and power door lock become inoperative.
The PDM communicates with the PRDM over a LIN circuit. In the event the PRDM fails, the RHR power window and power door lock become inoperative.
DDM/ PDM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1087:83 | LIN Bus "A": Value Of Signal Protection Calculation Incorrect | Sets by the DDM and PDM when a communication fault is detected from the communication from the corresponding RDM. |
| B1087:87 | LIN Bus "A": Signal Invalid | Sets by the DDM and PDM when a communication fault is detected from the communication from the corresponding RDM. |
Possible Causes
- Fuse
- Wiring, terminals or connectors
- RDM
- DDM
- PDM
- BCM
Visual Inspection and Diagnostic Pre-checks
- Check the BCM fuse 29 (30A) and fuse 30 (30A) and make sure they are OK.