LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1134 (Instrument Panel And Console) >> Removal And Installation >> Auxiliary Power Point >> Removal

Auxiliary Power Point: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the power point cover.
    GFD275339Courtesy of FORD MOTOR COMPANY
  2. Position the power point extractor so that it engages in the adjacent slots in the power point socket. Use Special Service Tool: 501-194 Remover, Power Point.
    GFD275340Courtesy of FORD MOTOR COMPANY
    1. Install the receiver cup.
    2. Install and tighten the wing nut. Use Special Service Tool: 501-194 Remover, Power Point.
    GFD275341Courtesy of FORD MOTOR COMPANY
  3. Tighten the wing nut to pull the power point socket out of the retainer. Use Special Service Tool: 501-194 Remover, Power Point.
    GFD275342Courtesy of FORD MOTOR COMPANY
  4. Disconnect the electrical connector.
GFD275343Courtesy of FORD MOTOR COMPANY