Pinpoint Test F : All Power-Fold Seats Are Inoperative: Notes
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Wiring Diagram Power Seats for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Second Row Seats - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1553:11 | Second Row Seat Fold Switch: Circuit Short To Ground | This DTC sets when the second row seat control switch input circuit is shorted to ground. This DTC may be set on-demand or in continuous memory. |
| B1553:13 | Second Row Seat Fold Switch: Circuit Open | This DTC sets when the second row seat control switch input circuit is open. This DTC may be set on-demand or in continuous memory. |
| B1553:2A | Second Row Seat Fold Switch: Signal Stuck In Range | This DTC sets when the second row seat control switch input circuit is stuck active. This DTC may be set on-demand or in continuous memory. |
Possible Causes
- Wiring, terminals or connectors
- Second row seat control switch
- SCMJ