Front Exhaust Pipe: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Lift up the vehicle.
Remove the under cover. < Ref. to REMOVAL , Front Under Cover. >
Remove the front oxygen (A/F) sensor. < Ref. to REMOVAL , Front Oxygen (A/F) Sensor. >
Remove the exhaust manifold RH lower cover and exhaust manifold LH cover.

Fig 2: Locating Exhaust Manifold RH Lower Cover And Exhaust Manifold LH Cover Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts and nuts which hold joint pipe onto exhaust manifold RH.

Fig 3: Locating Bolts And Nuts Which Hold Joint Pipe Onto Exhaust Manifold RH
Courtesy of SUBARU OF AMERICA, INC.
While holding the front exhaust pipe with one hand, remove the nuts which hold the exhaust manifold to the cylinder head exhaust port and remove the front exhaust pipe.

Fig 4: Locating Nuts Which Hold Exhaust Manifold To Cylinder Head Exhaust Port (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 5: Locating Nuts Which Hold Exhaust Manifold To Cylinder Head Exhaust Port (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.