Center Exhaust Pipe: Assembly

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the center exhaust pipe (rear) to the center exhaust pipe (front).
NOTE: Use a new gasket.

Tightening torque:

42.5 N.m (4.3 kgf-m, 31.3 ft-lb)

Fig 1: Center Exhaust Pipe (Rear) And Center Exhaust Pipe (Front)
Courtesy of SUBARU OF AMERICA, INC.
Install the center exhaust pipe upper cover.
Tightening torque:

13 N.m (1.3 kgf-m, 9.6 ft-lb)
Install the rear oxygen sensor to the center exhaust pipe (rear). < Ref. to INSTALLATION , Rear Oxygen Sensor. >