Rear Spoiler: Removal
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may include installation details.
- Open the liftgate.
-
NOTE: For clarity Liftgate is not shown.
Position the liftgate opening weather-strip aside.
-
NOTE: For clarity Liftgate is not shown.
Release the clips and remove the liftgate opening upper trim panel.
- Disconnect the spoiler electrical harness.
- Disconnect the electrical connector.
- Detach the electrical harness retainer.
- Disconnect the rear window washer hose connection.
- Release the wiring harness grommet and route the spoiler harness out from vehicle.
- Open the liftgate window.
- Remove the spoiler mounting fasteners.
- Remove the nuts.
Torque: 12 lb.in (1.3 Nm)
- Release the spoiler tabs using screwdriver.
- Remove the nuts.
- Remove the spoiler to liftagate window retainers.
Torque: 15 lb.in (1.7 Nm)
- Remove the spoiler.