LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1127 (Exterior Trim And Ornamentation) >> Removal And Installation >> D-Pillar Moulding >> Installation

D-Pillar Moulding: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Install the D-pillar moulding and the blind rivets. Use the General Equipment: Blind Rivet Gun
    GFD274970Courtesy of FORD MOTOR COMPANY
  3. Install the blind rivets. Use the General Equipment: Blind Rivet Gun
GFD274971Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals