LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1120 (Side And Rear Vision System) >> Diagnosis And Testing >> Blind Spot Information System >> Symptom Chart(s) >> Symptom Chart - CTA

Symptom Chart - CTA

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
Condition Possible Sources Action
A module does not respond to the diagnostic scan tool Fuse
Communication concern
Wiring, terminals or connectors
Module
REFER to:MODULE COMMUNICATIONS NETWORK (2 OF 2) .
The CTA system is inoperative or does not function correctly Refer to the Pinpoint Test GO to Pinpoint Test B 
The CTA system has poor or inconsistent performance Refer to the Pinpoint Test GO to Pinpoint Test B 
The CTA system message center warnings are not displayed and the exterior mirror BLIS®/ CTA LED does not illuminate Refer to the Pinpoint Test GO to Pinpoint Test B 
An exterior mirror BLIS®/ CTA LED does not illuminate when the audio tone sounds for the CTA system Refer to the Pinpoint Test GO to Pinpoint Test B 
An exterior mirror BLIS®/ CTA LED is always on Refer to the Pinpoint Test GO to Pinpoint Test C 
An exterior mirror BLIS®/ CTA LED does not illuminate Refer to the Pinpoint Test GO to Pinpoint Test D 
The IPC message center displays a blocked sensor message Refer to the Pinpoint Test GO to Pinpoint Test E 
The CTA system cannot be turned off in the message center Refer to the Pinpoint Test GO to Pinpoint Test F