LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Engine Mechanical (H4DO)) >> Chain Cover >> Disassembly

Chain Cover: Disassembly

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil filler cap.
    Fig 1: Locating Oil Filler Cap
    G07669362Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the engine oil filter and the oil pump union. < refer to REMOVAL , Engine Oil Filter >
  3. Remove the oil pressure switch. < refer to REMOVAL , Oil Pressure Switch >
  4. Remove the engine oil temperature sensor. < refer to REMOVAL , Engine Oil Temperature Sensor >
  5. Remove the oil control solenoid. < refer to REMOVAL , Oil Control Valve >
  6. Remove the camshaft position sensor. < refer to REMOVAL , Camshaft Position Sensor >
  7. Remove the actuator cover from chain cover.
    Fig 2: Locating Actuator Cover Bolts
    G07669363Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the sensor cover from chain cover.
    Fig 3: Locating Sensor Cover Bolts
    G07669364Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals