LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Engine Mechanical (H4DO)) >> Cam Carrier >> Disassembly >> Cam Carrier LH

Cam Carrier LH

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the bolts (front camshaft cap LH, intake center camshaft cap LH, intake rear camshaft cap LH, exhaust center camshaft cap LH and exhaust rear camshaft cap LH) equally, a little at a time in numerical sequence as shown in the figure, and remove the camshaft cap.
    NOTE: Arrange camshaft caps in order so that they can be installed in their original positions.
    Fig 1: Identifying Camshaft Caps Bolts Loosening Sequence (Cam Carrier LH)
    G07669491Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the intake camshaft LH and the exhaust camshaft LH from cam carrier LH.
    Fig 2: Locating Intake Camshaft LH And Exhaust Camshaft LH
    G07669492Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the filter from cam carrier LH.
    Fig 3: Locating Filter Bolt Of Cam Carrier LH
    G07669493Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the liquid gasket from cam carrier LH and front camshaft cap LH, intake rear camshaft cap LH and exhaust rear camshaft cap LH.
scientia non olet · About LEMON Manuals