DTC C0076 Clutch Signal: Trouble Symptom
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Hill start assist does not operate.
NOTE:
Depending on the user clutch operation patterns, the hill start assist warning light may illuminate for a while, and then go off.
Illumination condition:
While the vehicle speed is above 10 km/h, and the clutch switch signal ON (depressed) condition continues five minutes or more, if the vehicle speed lowers below 10 km/h, the module judge as abnormal (clutch switch stuck ON), and then turn on the warning light.
Turning off condition:
If the clutch switch signal OFF (foot released) condition continues one second, the module turns off the warning light.
The hill start assist function does not operate, while the warning light illuminates.