LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Manual Transmission And Differential) >> Transfer Drive Gear >> Installation

Transfer Drive Gear: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transfer drive gear.

    Tightening torque: 

    26 N.m (2.7 kgf-m, 19.2 ft-lb) 

    Fig 1: Transfer Drive Gear
    G07665992Courtesy of SUBARU OF AMERICA, INC.
  2. Install the transfer driven gear.
  3. Select a thrust washer. < Ref. to INSTALLATION , Transfer Case and Extension Case Assembly. >
  4. Install the extension case assembly. < Ref. to INSTALLATION , Transfer Case and Extension Case Assembly. >
  5. Install the transfer case and the extension case assembly. < Ref. to INSTALLATION , Transfer Case and Extension Case Assembly. >
  6. Install the back-up light switch and the neutral position switch. < Ref. to INSTALLATION , Switches and Harness. >
  7. Install the manual transmission assembly to the vehicle. < Ref. to INSTALLATION , Manual Transmission Assembly. >
scientia non olet · About LEMON Manuals