LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Manual Transmission And Differential) >> Reverse Check Sleeve >> Installation

Reverse Check Sleeve: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the reverse check sleeve assembly.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

    Fig 1: Reverse Check Sleeve Assembly With Bolts
    G07666009Courtesy of SUBARU OF AMERICA, INC.
  2. Install the ball, reverse accent spring, gasket and plug to the transfer case.
    NOTE: Use a new gasket.

    Tightening torque: 

    9.75 N.m (1.0 kgf-m, 7.2 ft-lb) 

    Fig 2: Plug, Gasket, Reverse Accent Spring And Ball
    G07666010Courtesy of SUBARU OF AMERICA, INC.
  3. Attach the shifter arm to the transfer case assembly.
  4. Install the transfer case together with the extension case assembly. < Ref. to INSTALLATION , Transfer Case and Extension Case Assembly. >
  5. Install the manual transmission assembly to the vehicle. < Ref. to INSTALLATION , Manual Transmission Assembly. >
scientia non olet · About LEMON Manuals