Bevel Pinion Gear Backlash
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Measure the backlash between differential bevel gear and differential bevel pinion. If backlash is not within specified value, install a suitable washer to adjust. < Ref. to ADJUSTMENT , Front Differential Assembly. >
NOTE:
Be sure the pinion gear teeth contacts adjacent gear teeth during measurement.
Standard backlash
0.13 - 0.18 mm (0.0051 - 0.0077 in)
ST1 498247001 MAGNET BASE
ST2 498247100 DIAL GAUGE