LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1082 (Automatic Transmission - 10R80 (2 Of 2)) >> Removal And Installation >> Turbine Shaft Speed (TSS) Sensor >> Installation

Turbine Shaft Speed (TSS) Sensor: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the TSS sensor.

    1. Install the TSS sensor bolt.

      Torque: 62 lb.in (7 Nm)

    2. Connect the electrical connector. Slide the plastic lock to the locked position.

    GFD273645Courtesy of FORD MOTOR COMPANY
  2. Install the main control valve body. Refer to: Main Control Valve Body . Refer to: Main Control Valve Body .