LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1082 (Automatic Transmission - 10R80 (2 Of 2)) >> Removal And Installation >> Transmission Fluid Auxiliary Pump >> Removal

Transmission Fluid Auxiliary Pump: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: It is not necessary to remove the transmission fluid filter to remove the transmission fluid auxiliary pump.

    Remove the transmission fluid pan and gasket. Refer to: Transmission Fluid Pan, Gasket and Filter . .

  2. Remove the bolt and the transmission fluid auxiliary pump tube.
    GFD273575Courtesy of FORD MOTOR COMPANY
  3. Remove the transmission fluid auxiliary pump tube seal.
    GFD273576Courtesy of FORD MOTOR COMPANY
  4. Disconnect the transmission fluid auxiliary pump.
    GFD273577Courtesy of FORD MOTOR COMPANY
  5. NOTE: A short 1/4" drive T-30 socket is required to remove the rear pump bolt.
    NOTE: The fluid auxiliary pump may need to be removed from the RH side of the vehicle to clear the exhaust system and fluid filter.

    Remove the bolts and the transmission fluid auxiliary pump.

    1. If necessary, remove the fluid auxiliary pump towards the RH side.

GFD273578Courtesy of FORD MOTOR COMPANY