LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1082 (Automatic Transmission - 10R80 (2 Of 2)) >> Diagnosis And Testing >> Diagnostic Trouble Code (DTC) Charts and Pinpoint Tests - 3.5L EcoBoost (272kW/370PS) >> Pinpoint Tests >> Pinpoint Test I : DTC U0140 >> Notes

Pinpoint Test I : DTC U0140: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Wiring Diagram Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions 
The TCM sets the DTCs U0140 when key messages are not received for longer than 5 seconds. Other modules that require data from the BCM all set communication DTCs and may also exhibit system function concerns.
DTC Fault Trigger Conditions 
DTC Description Fault Trigger Condition
TCM U0140:00 Lost Communication With Body Control Module: No Sub Type Information Sets in continuous memory in the TCM if BCM data messages such as tire size, axle ratio, global real time, engine off time received from the BCM over the HS-CAN are missing for longer than 2 seconds.

Possible Sources 

Communication concern

Battery voltage concern

BCM

TCM