LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Engine Controls (Diagnostics) (H4DOTC)) >> Read Diagnostic Trouble Code (DTC) >> Operation >> SUBARU Select Monitor (Normal Mode)

SUBARU Select Monitor (Normal Mode)

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the << Main Menu >> display screen, select the {Each System Check}.
  2. On the << System Selection Menu >> display screen, select the {Engine Control System}.
  3. Click the [OK] button after the information of engine type has been displayed.
  4. On the << Engine Diagnosis >> display screen, select the {Diagnostic Code (s) Display}.
  5. On the << Diagnostic Code (s) Display >> screen, select the {Temporary Diagnostic Code (s)} or {Memorized Diagnostic Code (s)}.
    NOTE:
    • For detailed operation procedure, refer to the PC application help for Subaru Select Monitor.
    • For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
scientia non olet · About LEMON Manuals