Malfunction Indicator Light Does Not Come On: Trouble Symptom
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
When the ignition switch is turned to ON (engine OFF), malfunction indicator light does not illuminate.
DIAGNOSIS PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. | Is DTC of LAN system displayed? Refer to READ DIAGNOSTIC TROUBLE CODE (DTC) | Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) | Replace the meter case assembly of combination meter. Refer to COMBINATION METER |