LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Engine Controls (Diagnostics) (H4DO)) >> Read Diagnostic Trouble Code (DTC) >> Operation >> SUBARU Select Monitor (OBD Mode)

SUBARU Select Monitor (OBD Mode)

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. On << Main Menu >> display, select {Each System Check}.
  2. On << System Selection Menu >> display, select {Engine Control System}.
  3. Click the [OK] button after the information of engine type has been displayed.
  4. On << Engine Diagnosis >> display, select {OBD System}.
  5. On << OBD Menu >> display, select {Diagnostic Code(s) Display}.
  6. Make sure DTC is shown on the screen.
    NOTE:
    • For detailed operation procedures, refer to application help for Subaru Select Monitor.
    • For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". < refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
scientia non olet · About LEMON Manuals